o Powerful 14.0 AMP motor to handle the most demanding applications
o Constant Speed Control automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs
o Soft Start suppresses start-up reaction for more control and better accuracy
o Variable Speed control dial enables user to match the speed to the application for greater versatility
o L.E.D. Service Light notifies the user approximately 8 hours before the brushes need to be replaced
o L.E.D. Power Lights indicate switch failure or cord damage
o Makita Motor Advantage includes field core interlocking steel laminations, dual ball bearing armature, and large surface commutator with the highest quality raw materials, resulting in efficient transfer of energy for greater power
o Extended Life Brushes are longer for more work between service intervals and less downtime
o Automatic Brush Cut-Off protects commutator from damage for longer tool life
o Durable blow-molded rolling tool case for safe storage and easy transportation
o "No hammering when idling" helps increase tool life
o Rubberized ergonomic soft grip provides more comfort and control
o Easy-to-operate slide switch increases productivity and allows for continuous use
o Side-handle swivels 360? for greater control
o Accepts commonly used 1-1/8'' Hex steel

Makita HM1812 32Kg AVT Hex Shank Electric Breaker

Makita once again leaps to the head of the performance league table for mighty 32kg electric breakers with the new HM1812. It sets best-in-class standards with a 60% increase in impact energy at 73 joules and a 25% reduction in vibration to just 6.5m/s2.

The HM1812 introduces a new vibration damping system that effectively separates the impact generation from the motor housing, once again cutting vibration ratings and produces a remarkable 4 hours 43 minutes of useable work time to reach the Exposure Limit Value.
FEATURES

60% increase in impact energy to 73 joules
25% reduction in vibration to just 6.5m/s2
4 hours 43 minutes run time to ELV
Vibration absorbing housing
Counterweight mechanism reduces vibration when chipping
"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body
Soft start
LED's indicate when to replace carbon brush
Ergonomic soft grip
Highly durable switch
High power
Name plate and serial label positioned where it will be free from scratches and damage
Compatible with D-54972 Hammer Trolley
Connectable to dust extractor

The Makita 3/4 in. 2-Speed Hammer Drill has variable-speed operation to help with starting holes in concrete and steel. Start with low gear for speeds up to 900 RPM and 18,000 BPM. Then switch to high to take advantage of up to 2,300 RPM and 46,000 BPM. The 1/2 in. keyed chuck is powered by a 6 Amp motor and ball bearings translate to years of dependable use. This hammer drill also has adjustable side handles and a depth gauge for drop-in anchors. It comes with a storage case.

Powerful 6 AMP motor for the most demanding applications
2-speed (0-900 & 0-2,300 RPM) with speed control switch
2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
Variable speed switch for easy starting of holes
All-ball bearing construction for longer tool life
Adjustable side handle for greater control
Depth gauge for "drop-in" type anchors
Recessed lock-on button for continuous use
Lightweight (6.4 lbs.) for reduced operator fatigue
Double insulated

CXT HAMMER DRIVER DRILL 12V

Features

Powerful 1,510 W motor delivers 19.1 J of impact energy to handle the most demanding applications
Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control
Soft start suppresses start-up reaction for more control and better accuracy
Depth gauge for increased drilling consistency
LED power light indicates switch failure or cord damage

Makita JN1601 Includes

Wrench (781028-4)
Hex Wrench (783208-8)

Makita JN1601 Features

Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
Die rotates 360?
Large 1/4" stroke
Ergonomic, slim body design for easy gripping
Extremely light (weighs only 3.6 lbs.) for easy handling
Lock-on sliding switch for continuous operation
Built-in thickness gauge for convenience
Easy punch and die replacement for reduced down time
Double insulated

Makita Reciprocating Saw (model JR3051T) delivers superior power and performance with less vibration. The JR3051T is powered by a 12 AMP motor with electronic speed control to maintain constant speed under load. The JR3051T has a long 1-3/160 stroke for faster cutting with 0-3,000 strokes per minute (SPM) and a variable speed trigger to match the speed of the saw to the application.

The JR3051T has a durable body design that keeps dust and debris away from the motor, with rubber and felt seals to keep dust and water out for a longer tool life. The JR3051T weighs 7.3 lbs., with tool-less blade change.

The JR3051T is a versatile and powerful reciprocating saw engineered for demolition, metal cutting, wood cutting, drywall and plaster, plastics and remodeling. It0s ideal for builders, roofers, metal fabricators, remodelers, and general contractors seeking a best-in-class industrial quality reciprocating saw.